SubConn Circular Splitconn - 2 contacts
Drawing information
Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)
Connector specifications
- Voltage rating: 600 V DC/AC rms
- 2 contacts current rating: 10 A per contact (max 20 A per connector)
- Insulation resistance: > 200 Mohm
- Contact resistance: < 0.01 ohm
- Wet matings: > 500 (open face rated)
- Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
- Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
- Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
- Design depth rating: 1,400 bar, 20,000 psi
- Qualified pressure tested: 800 bar, 11,600 psi
Material specifications
- Connector body: Chloroprene rubber
- Contacts: Gold plated brass UNS - C36000
- Location pin: Stainless steel AISI 303
- Locking sleeves: POM
- Snap rings: Stainless steel AISI 302
- 2 conductor inline cable (2 ft, 60 cm): 18 AWG, 0.82 mm2 chloroprene rubber
Face view (male)
Inline cable colour code
1: Black
2: White
Nominal cable outside diameter (OD)
2 conductor cable 0.276’’, 7 mm
3D files
Please note that our 3D files are not 100 p.c. dimensionally stable.
If a 3D file is needed for tolerance issues, please contact MacArtney for more information.