SubConn Power Battery - 2, 3 and 4 contacts

 

 

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

 

Connector specifications

Voltage rating: 600 V AC rms
DC rating: 85% of above AC rating
Current rating: 25 A per contact (max 50 A per connector)
Insulation resistance: > 200 Mohm
Contact resistance: < 0,01 ohm
Wet matings: > 500
Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
Depth rating: 1,400 bar, 20,000 psi

 

Material specifications

Connector body: Chloroprene rubber
Bulkhead body: Brass, stainless steel, titanium or anodised aluminium
Contacts: Gold plated brass UNS - C36000
Location pin: Stainless steel AISI 303
O-rings: Nitrile
Locking sleeves: POM
Snap rings: Stainless steel AISI 302
2 and 3 conductor inline cable (60 cm, 2 ft): 10 AWG 5.26 mm2 chloroprene rubber
4 conductor inline cable (60 cm, 2 ft): 12 AWG 3.31 mm2 chloroprene rubber
2 and 3 contacts bulkhead leads (30 cm, 1 ft): 10 AWG 5.26 mm2 tagged PTFE
4 contacts bulkhead leads (30 cm, 1 ft): 12 AWG 3.31 mm2 tagged PTFE

 

Face view (male)

 

 

Inline cable colour code

1: Black
2: White
3: Red
4: Green

(3 conductor cable colour code: 1 black, 2 white, 3 green)

 

Nominal cable outside diameter (OD)

2 conductor cable 0.640”, 16.3 mm
3 conductor cable 0.671”, 17.0 mm
4 conductor cable 0.730”, 18.5 mm

3D files 

Please note that our 3D files are not 100 p.c. dimensionally stable due to the fact that a SubConn® connector is mainly made from rubber which changes tolerances during curing.

If a 3D file is needed for tolerance issues, please contact MacArtney for more information.

Step files

X_B files