Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

Connector specifications

• Voltage rating inline and bulkhead (1 KV version): 1 KV DC/AC rms
• Current rating inline, overmould and bulkhead (1 KV version): 250 A
• Voltage rating overmould and bulkhead (3 KV version): 3 KV DC/AC rms
• Current rating bulkhead (3 KV version)*: 90 A
• Insulation resistance: > 200 Mohm
• Contact resistance: < 0.01 ohm
• Wet matings: > 500
• Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
• Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
• Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
• Qualified pressure tested: 800 bar, 11,600 psi

Material specifications

• Connector body: Chloroprene rubber
• Bulkhead body: Brass, stainless steel or titanium
• Contacts: Brass UNS - C36000
• Adapter: Brass UNS - C36000
• O-rings: Nitrile
• Locking sleeves: POM or stainless steel
• Snap rings: Stainless steel AISI 302
• Inline cable (60 cm, 2 ft): 1/0 AWG 53.46 mm2 chloroprene rubber

Inline cable colour code

1: Black

Nominal cable outside diameter (OD)

1 conductor cable 0.6” to 0.85”, 15.0 mm to 22.0 mm

Additional information

* Only if the bulkhead is mounted in non conducting oil