SubConn Low Profile - 9 contacts

 

 

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

 

Connector specifications

Voltage rating: 600 V AC rms
DC rating: 85% of above AC rating
Current rating: 10 A per contact (max 40 A per connector)
Insulation resistance: > 200 Mohm
Contact resistance: < 0.01 ohm
Wet matings: > 500
Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
Depth rating: 700 bar, 10,000 psi
Depth rating PEEK: 300 bar, 4,350 psi

  

Material specifications

Connector body: Chloroprene rubber
Bulkhead body: Brass, stainless steel, titanium, anodised aluminium or PEEK
Contacts: Gold plated brass UNS - C36000
O-rings: Nitrile
Locking straps: Chloroprene rubber
Inline cable (60 cm, 2 ft): 16 AWG 1.31 mm2 chloroprene rubber
Bulkhead leads (30 cm, 1 ft): 18 AWG 0.82 mm2 tagged PTFE

 

Face view (male)

 

   

Inline cable colour code

1: Black
2: White
3: Red
4: Green
5: Orange
6: Blue
7: White/black
8: Red/black
9: Green/black

 

Nominal cable outside diameter (OD)

9 conductor cable 0.590’’, 15.0 mm

3D files 

Please note that our 3D files are not 100 p.c. dimensionally stable due to the fact that a SubConn® connector is mainly made from rubber which changes tolerances during curing.

If a 3D file is needed for tolerance issues, please contact MacArtney for more information.

Step files

X_B files