SubConn Power Ethernet Low Profile - 13 contacts

 

 

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

 

Connector specifications

Voltage rating: 600 V AC rms
Voltage rating on data wire: 250 V AC rms
DC rating: 85% of above AC rating
Current rating on power wire: 4 A per contact (max 16 A per connector)
Data rate: 1 Gbit/s (up to 75 m)
Insulation resistance: > 200 Mohm
Contact resistance: < 0.01 ohm
Wet matings: > 500
Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
Depth rating: 600 bar, 8,700 psi
Depth rating PEEK: 300 bar, 4,350 psi

 

Material specifications

Connector body: Chloroprene rubber
Bulkhead body: Brass, stainless steel or titanium
Contacts: Female sockets in gold plated brass UNS - C36000, male pins in gold plated beryllium copper
O-rings: Nitrile
Locking straps: Chloroprene rubber
Inline cable (100 cm, 3.3 ft): 4 pair 24 AWG, 0.20 mm2 PUR, power conductors 4 x 18 AWG, 0.82 mm2, screen: tinned copper braid
Bulkhead leads (100 cm, 3.3 ft): CAT 5E patch cable, 5 x 20 AWG, 0.52 mm2 with coloured wires incl. RJ 45 connector (not installed)

 

Face view (male)

 

 

Inline cable colour code

1: Black 
2: Screen (orange wire on bulkhead) 
3: White 
*4-5: Brown, Brown/white
*6-7: Blue, Blue/white  
*8-9: Orange, Orange/white
*10-11: Green, Green/white
12: Red
13: Green

* Twisted pairs

 

Nominal cable outside diameter (OD)

PUR cable 0.550'', 13.97 mm

3D files 

Please note that our 3D files are not 100 p.c. dimensionally stable due to the fact that a SubConn® connector is mainly made from rubber which changes tolerances during curing.

If a 3D file is needed for tolerance issues, please contact MacArtney for more information.

Step files

X_B files