SubConn Ethernet Low Profile - 9 contacts



Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)


Connector specifications

Voltage rating: 250 V AC rms
DC rating: 85% of above AC rating
Data rate: 1 Gbit/s (up to 75 m)
Insulation resistance: > 200 Mohm
Contact resistance: < 0.01 ohm
Wet matings: > 500
Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
Depth rating: 600 bar, 8,700 psi
Depth rating PEEK: 300 bar, 4,350 psi


Material specifications

Connector body: Chloroprene rubber
Bulkhead body: Brass, stainless steel, titanium, anodised aluminium or PEEK
Contacts: Female sockets in gold plated brass UNS - C36000, male pins in gold plated beryllium copper
O-rings: Nitrile
Locking straps: Chloroprene rubber
Inline cable (100 cm, 3.3 ft): 4 pair 24 AWG, 0.20 mm2 PUR, screen: tinned copper braid
Bulkhead leads (100 cm, 3.3 ft): CAT 5E patch cable incl. RJ 45 connector (not installed)


Face view (male)



Inline cable colour code

*1-2: Brown, Brown/white
*3-4: Blue, Blue/white
*5-6: Orange, Orange/white
*7-8: Green, Green/white
9: Screen (orange wire on bulkhead) 

* Twisted pairs


Nominal cable outside diameter (OD)

PUR cable 0.410'', 10.4 mm

3D files 

Please note that our 3D files are not 100 p.c. dimensionally stable due to the fact that a SubConn® connector is mainly made from rubber which changes tolerances during curing.

If a 3D file is needed for tolerance issues, please contact MacArtney for more information.

Step files

X_B files