SubConn Circular Right Angle - 6, 8 and 10 contacts

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

 

Connector specifications

  • Voltage rating: 600 V DC/AC rms
  • Current rating: 10 A per contact (max 50 A per connector)
  • Insulation resistance: > 200 Mohm
  • Contact resistance: < 0.01 ohm
  • Wet matings: > 500
  • Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
  • Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
  • Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
  • Design depth rating: 1,400 bar, 20,000 psi
  • Qualified pressure tested: 800 bar, 11,600 psi

 

Material specifications

  • Connector body: Chloroprene rubber
  • Contacts: Brass UNS - C36000
  • Location pin: AISI 303
  • Locking sleeves: POM or stainless steel
  • Snap rings: AISI 302
  • 6 and 8 conductor inline cable (60 cm, 2 ft): 16 AWG 1.31 mm2 chloroprene rubber
  • 10 conductor inline cable (60 cm, 2 ft): 18 AWG 0.82 mm2 chloroprene rubber

 

Face view (male)

 

Inline cable colour code

1: Black
2: White
3: Red
4: Green
5: Orange
6: Blue
7: White/black
8: Red/black
9: Green/black
10: Orange/black

 

Nominal cable outside diameter (OD)

6 conductor cable 0.520”, 13.2 mm
8 conductor cable 0.555”, 14.1 mm
10 conductor cable 0.605”, 15.4 mm

3D files 

Please note that our 3D files are not 100 p.c. dimensionally stable.
If a 3D file is needed for tolerance issues, please contact MacArtney for more information.

Step files

X_B files