Power/Ethernet cable - Type 4480/K

Construction characteristics

Ethernet element (cat. 6): 2 x 0,13 mm² (26 AWG) bare copper conductor insulated
with polyolefin. Two cores twisted together with a central
cross separator (4 each)
Colour: White/orange, white/green, white/blue, white/brown
Overall Polyester/Alu tape and tinned copper braid. Coverage ≥80% (1 each)
Conductor: 1 mm² (18 AWG) bare copper conductor insulated with special polymer.
Nominal diameter 2,70 mm (4 each). Black, numbered 1-4
Filler: Water blocked compound
Inner tape: No hygrosic tape
Inner shield: Tinned copper braid. Coverage ≥ 85%
Inner jacket: Polyurethane, nominal thickness 1,2 mm. Colour blue
Strength member: Aramidic yarn braid
Outer jacket: Polyurethane, nominal thickness 1,2 mm. Colour blue

 

Mechanical characteristics

Diameter: 16.10 mm ±0.5 mm
Weight in air: 270 kg/km
Weight in seawater: 57 kg/km
Min. bending radius: 161 mm
Strength member breaking load: 20 kN
Depth rating: 3,000 m (deeper on request)

 

Electrical characteristics

Operating voltage: 1,000 V for 1 mm² conductor
Test voltage: 4.000 Vac x 10 min for 1 mm² conductor
1,5 kVac x 1 min for 4 x 2 AWG26 (cat. 6) (cond. - cond.)
1,5 kVac x 1 min for 4 x 2 AWG26 (cat. 6) (cond. - shield)
Conductor resistance: 19.5 Ω/km max for 1 mm² conductor
145 Ω/km max for 4 x 2 AWG26 (cat. 6)
Insulation resistance: ≥ 5 GΩxkm for 1 mm² conductor + 4 x 2 AWG26 (cat. 6)

 

4 x 2 x 26 AWG (cat. 6)

Capacitance: 52 pF/m (cond. - cond.)
Nominal impedance: 100±15Ω (1-100 MHz)
Max attenuation: ≤3,2 dB/100 m at 1,0 MHz
≤8,9 dB/100 m at 10,0 MHz
≤12,6 dB/100 m at 20,0 MHz
≤28,7 dB/100 m at 100,0 MHz
Date rate: 1 Gbit/s (up to 90 m)