Power/Ethernet cable - Type 4480/K

Construction characteristics

2 x 0,13 mm² (26 AWG) bare copper conductor insulated with polyolefin.
Two cores twisted together (4 each)
Colour: White/orange,white/green,white/blue,white/brown
Four pairs stranded together with a central cross separator and with filler (textile or extruded).
Inner jacket of special LSZH flame retardant and no corrosive compound.
Overall Polyester/Alu tape and tinned copper braid. Coverage ≥80% (1 each)
Conductor: 1 mm² (18 AWG) bare copper conductor insulated with special polymer.
Nominal diameter 2,70 mm (4 each). Black, numbered 1-4
Filler: Water blocked compound
Inner tape: No hygrosic tape
Inner shield: Tinned copper braid. Coverage ≥ 85%
Inner jacket: Polyurethane, nominal thickness 1,2 mm, nominal OD 12,9 mm. Colour blue
Strength member: Aramidic yarn braid, nominal thickness approx 0,4 mm
Outer jacket: Polyurethane, nominal thickness 1,2 mm. Colour blue
Marking: Power/Ethernet cable Type 4480/K / 07 month/year (mmyy)

 

Mechanical characteristics

Diameter: 16.10 mm ±0.5 mm
Weight in air: 270 kg/km
Weight in seawater: 57 kg/km
Min. bending radius: 161 mm
Strength member breaking: load 20 kN
Depth rating: 3,000 m (deeper on request)
Operating temperature range: -20°C - +80°C

 

Electrical characteristics

Operating voltage: 1,000 V for 1 mm² conductor
Test voltage: 4.000 Vac x 10 min for 1 mm² conductor
1,5 kVac x 1 min for 4 x 2 AWG26 (cond. - cond.)
1,5 kVac x 1 min for 4 x 2 AWG26 (cond. - shield)
Conductor resistance: 19.5 Ω/km max for 1 mm² conductor
145 Ω/km max for 4 x 2 AWG26
Insulation resistance: ≥ 5 GΩxkm for 1 mm² conductor + 4 x 2 AWG26

 

4 x 2 x 26 AWG

Capacitance: 52 pF/m (cond. - cond.)
Nominal impedance: 100±15Ω (1-100 MHz)
Propagation velocity: 67% approx. 
Max attenuation: ≤3,2 dB/100 m at 1,0 MHz
≤5,7 dB/100 m at 4,0 MHz
≤8,9 dB/100 m at 10,0 MHz
≤11,3 dB/100 m at 16,0 MHz
≤12,6 dB/100 m at 20,0 MHz
≤15,8 dB/100 m at 31,25 MHz
≤22,5 dB/100 m at 62,5 MHz
≤28,7 dB/100 m at 100,0 MHz
Date rate: 1 Gbit/s (up to 90 m)

 

Other characteristics

Silicone free
RoHS-II/Reach Compliance