SubConn®

SubConn Inc. and The MacArtney Underwater Technology Group have been supplying the world's leading range of underwater pluggable electrical connectors to the demanding underwater industry for over 30 years. The SubConn range has been developed over the years to meet the needs of our global customers from shallow water use to full ocean depth rating.
 
We pride ourselves on manufacturing and delivering industry standard, reliable and affordable connectors and cables, supported internationally by the MacArtney Underwater Technology Group.
 
Our globally trusted range of SubConn connectors is continually being tested and reviewed to ensure the highest quality and suitability to the underwater and offshore market. Our range is regularly extended to meet new individual or industry requirements.

www.subconn.com

The Standard Circular connector series formed the basis for the development and technology of the Subconn® products available today. First introduced in 1978, and still in great demand, the connectors were quickly recognized as a cost effective and rugged solution by the underwater and harsh environment markets.
Circular 2 Contacts Circular 3 Contacts Circular 4 Contacts Circular 5 Contacts Circular 6 Contacts Circular 8 Contacts Circular 10 Contacts Circular 12 Contacts Circular 16 Contacts Micro 2 Contacts Micro 3 Contacts Micro 4 Contacts Micro 5 Contacts Micro 6 Contacts Micro 8 Contacts Micro 10 Contacts Micro 12 Contacts Micro 16 Contacts

The Low Profile Series, as the name implies, is designed to fit on underwater flanges, instruments or sensors where height is restricted or a "neater" solution is required. The connectors use the same contact sizes as the Standard and Micro Circular Series.
Low Profile 2 Contacts Low Profile 3 Contacts Low Profile 4 Contacts Low Profile 5 Contacts Low Profile 7 Contacts Low Profile 9 Contacts Micro Low Profile 3 Contacts Micro Low Profile 7 Contacts Micro Low Profile 9 Contacts

The Subconn® Metal Shell (MS) Series was introduced as an alternative to the Standard Circular and Micro Series bulkhead connectors where a more rugged and protected connector is required to mate with the standard in-line connectors. The new Micro stainless steel right angle connector series is documented under the Standard Circular and Micro Series section of this catalogue
Metal Shell 2000 Series 3 Contacts Metal Shell 1500 Series 2 Contacts Metal Shell 1500 Series 3 Contacts Metal Shell 1500 Series 4 Contacts Metal Shell 1500 Series 5 Contacts Metal Shell 1500 Series 6 Contacts Metal Shell 1500 Series 8 Contacts Metal Shell 2000 Series 2 Contacts Metal Shell 2000 Series 4 Contacts Metal Shell 2000 Series 10 Contacts Metal Shell 2000 Series 12 Contacts Metal Shell 2400 Series 6 Contacts Metal Shell 2400 Series 8 Contacts Metal Shell 2400 Series 10 Contacts

The Power Series of Subconn® connectors was introduced to meet the growing demand for increased power requirements in underwater systems. There are currently 4 standard connectors in the series with a number of "special" connectors which are listed under the Specials section of the catalogue.
Power 1 Contact Battery 2 Contacts Battery 3 Contacts Battery 4 Contacts High Power 4 Contacts

Over the last 17 years a large number of "special" connector designs for specific applications have been produced. All use the proven unique Subconn® contact design and, for the most part, are rated for deep water applications.

Description The connectors range from a single contact to advanced metal shell connectors for geophysical transition zone applications. Unique products have been delivered for direct circuit board mounting, mass produced underwater flash units, hermaphroditic connectors and low profile proximity switches.
Micro 1 Contact Right Angle 6-8-10 Contacts Mini 1 Contact SplitConn 2 Contacts Low Profile Reed Switch 2 Contacts Geophysical 368 Series 2 Contacts Geophysical 368 Series 6 Contacts

The standard penetrator series is based on industry standard flange and bulkhead mount stainless steel bodies. There are four shell sizes, allowing an extensive combination of products. Both in-line and right angle designs are available in polyurethane and neoprene.

Description Designs are not limited to the standard bodies and many "specials" have been delivered. Combinations of power, signal and fibre optics are available in a single unit.
Penetrators 1500 Series Pentrators 2000 Series Penetrators 2400 Series Penetrators 3200 Series Water Blocked Penetrator

The SubConn® Underwater Ethernet Cable is the first high speed underwater communications system with true Ethernet type performance. The new, unique cable is based on industry standard SubConn® connector systems, already tried and trusted in the underwater technology industry, and offers a true system approach.

Unique, reliable performance at full ocean depth
SubConn® Underwater Ethernet Cable

The new SubConn® Combined Power Ethernet Cable provides data transfer and power for underwater instruments in one high performance cable. The specially designed 13 contact connector is capable of up to 1 Gbit/s data transmission over 100 metres of specialised underwater cable and is the latest addition to the successful Ethernet range.

The combined cable represents savings both in terms of space, as the connector has the same dimensions as the existing single function version, and in terms of economy, elminating the need for two single function cables.
SubConn® Combined Power Ethernet Cable

Related Info